Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It's discreet, doesn't use LED indications or key fobs and is concealed in the vehicle's wiring.
ghost vehicle immobiliser can also deactivate the system temporarily by using Transport Mode when renting out their vehicle. This guide will walk you through the steps of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key cloning attacks, hacking attacks and relay attacks. The system is linked directly to the ECU of your car and protected by a pin code that you choose. It's undetectable to thieves using diagnostic scanners or other advanced methods, and it is unable to be disabled by circuit cuts.
The system is simple to use, however professional installation is recommended to ensure a clean connection with the ECU of your vehicle. Installers who are approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complement your vehicle's protection package.
To avoid the accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. Once the battery is disconnected, the installer can start working safely. Basic hand tools are useful to make precise connections, while a multimeter can be used to verify electrical values and safety. Cable ties and insulation tape are also necessary for securing connections and keeping wiring neat. Lastly, the user manual offers specific instructions specific to your Ghost Immobiliser model.
During the installation, it is essential to choose the right grounding location that is free of any paint or debris. Installers must also ensure that the immobiliser's wires CAN H & CAN L are connected to the correct ECU ports. Depending on the model, these wires may require soldering or plugged in. A top-quality connector is recommended to ensure a long-lasting and secure connection.
Once what is ghost immobiliser is complete After the installation is complete, the customer can turn on the Transport Mode. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. To accomplish this, the user must hit the service button on the dashboard 5 times within 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great choice for those who rent out their vehicles regularly through platforms like Turo. An immobiliser can reduce insurance costs, since it lowers the chance of theft.
Getting Started
If you are looking for a solution to safeguard your vehicle from theft You can't go wrong with an autowatch ghost immobiliser. The device prevents your vehicle from starting even the case that someone steals or copies your key. It's possible due to its advanced technology that stops the engine from starting until the right PIN code has been entered.
The device works by connecting to the vehicle's CAN bus network, allowing it to communicate with the ECU directly. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence which only you know. This makes it impossible for anyone else to start your car. This is the best security system that will safeguard your most precious possessions and preserve its value when you want to sell it in the future.
Installing Ghost's immobiliser is straightforward however, you must follow the steps to avoid electrical issues and system malfunctions. You'll need to find a 12V power source and a good grounding on the chassis of your car. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques to ensure an effective connection. Also, make sure to protect the connections by insulating them with heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
After the wires have been connected, you are able to reconnect the battery and start the engine to test the immobiliser's functionality. If everything is functioning properly then you can put it in a secure place under the dash or somewhere else in the vehicle. Make sure to cover it well so that thieves can't alter it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it's a top-quality deterrent for car thieves. It offers superior protection against key cloning, hacking, and relay attacks. It isn't able to be disabled unless you know the code. The device is simple to use and can be set to an option for a service valet so that your vehicle won't be activated if you bring it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and directly connects to its CAN bus. The Ghost Immobiliser will not interfere with the factory settings of your car unlike other aftermarket systems which require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanners. This is because the system doesn't send and receive radio frequency signals, and it utilizes the CAN data format to communicate with your ECU. Additionally, it doesn't require any modification to your vehicle's existing key fobs.
Enter your disarm sequence (either two or one button) and then turn on the ignition in your car to activate the Ghost Immobiliser. The indicator will flash twice to verify that you have entered the correct code. You are now able to begin driving your car in a safe manner.
Once installed The Ghost Immobiliser can secure your vehicle from key cloning and hacking, while protecting the value of your car's pride and joy. If you ever need to surrender your vehicle for service or valet parking The Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) as well as an earthing point to complete the installation of the Ghost immobiliser. Make sure both are properly insulated and can be touched. It's also recommended to use cable ties to bundle and secure the wires. This will reduce the risk of tampering by potential thieves. Be sure to double-check the location of these points to avoid mistakes and mark them with a piece of tape or label. It's important to check all connections for signs of wear and tear. Loose connections can lead to problems with the system, so be certain that they are securely in place and properly insulated. Don't forget to test your Ghost Immobiliser after the installation is completed. This will make sure that the unit functions correctly and that all connections are safe and well-insulated. If there are any issues, you must be sure to resolve them immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that seamlessly into your vehicle's ECU to stop unauthorized engine start. Its innovative technology safeguards your vehicle from key cloning and hacking as well as other common methods used by thieves to steal cars. The Ghost works in conjunction with existing alarm and tracking systems to provide the best security for your car. The Ghost's unparalleled features and subtle design make it a popular choice for car lovers and security-conscious motorists alike.
To ensure proper integration of the Ghost Immobiliser, it's important to follow the steps of the installation procedure. The best way to begin is to consult the wiring diagram for your vehicle, which will serve as a guideline to locate and connecting the required wires. You'll then need to identify the power and grounding sources. Once these are found, you'll need to mark them so that they're easily identifiable during the installation process. In addition, it is important to use top-quality tools and materials. Basic hand tools can assist to make precise connections, while a multimeter will verify electrical values and ensure safety. Cable ties and insulation tape will help keep all connections neat and tidy. A Ghost-specific user's manual is also available.
Before proceeding with the installation it is important to test the system by entering the PIN code and starting the vehicle. This step will confirm that the immobiliser works according to plan, and prevents unauthorised vehicle starts. This step should be performed regularly as part of your routine vehicle inspections in order to ensure the system is always working correctly.
Once the installation has been completed, you can start driving your car with confidence. how much is a ghost immobiliser will safeguard your pride and joy from thieves who might steal your car. It will ensure that no one will drive away with your vehicle without having the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts at theft or tampering. This allows you to locate your car if it's stolen.
The Ghost can be used in a variety of vehicles and is compatible with the majority of major manufacturers. If you are interested in protecting your car with this cutting-edge device, contact Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, which assures us that we follow strict guidelines for the installation of our products. This reassures customers, insurers, and law enforcement that installations are done in a safe and correct manner.